CLiMET® 1054 Laser Particle Counter (1 Month Rental)

CLiMET® 1054 is laser particle counter, purposely designed to meet ISO 14644-1 requirements for ISO 3 through ISO 9 cleanroom environments. The straightforward control interface allows for ease of use, and the brushed-stainless steel exterior and laminated touch-screen LCD cover allows for thorough cleaning of surfaces before introduction into cleanrooms/clean zones.

Description

CLiMET® 1054 is laser particle counter, purposely designed to meet ISO 14644-1 requirements for ISO 3 through ISO 9 cleanroom environments. The straightforward control interface allows for ease of use, and the brushed-stainless steel exterior and laminated touch-screen LCD cover allows for thorough cleaning of surfaces before introduction into cleanrooms/clean zones.

PSC Biotech is the exclusive rental company of CLiMET® air samplers. The 1054, has a sample flow rate of 100 liters per minute (100 LPM), requiring only 10 minutes to take a full 1 cubic meter sample.

The CLiMET® 1054 performance is complimented by its portability. The unit weighs 14.25 lbs and is compact. Its Nickel Metal Hydride (NiH) rechargeable battery allows for about three and a half hours of runtime, making this unit ideal for sampling remote areas without compromising performance.

The CLiMET® system includes four levels of security for control over instrument test conditions, set-up of up-to twenty users (each with specific user level), and programmable audible alarms and alarm limits. The built-in printer allows for printing of: on-screen data, recorded data, alarm violation reports, and ISO14644/GMP/FS-209E reports. Also, the system is able to provide critical information on the data printouts, such as Unit ID, User ID, Pass/Fail Status, Sample Location ID, Counts, Date and Time.

CLiMET 1054Technical Specifications
Illumination source:Laser diode, 35 mW
Light Collection Optics:Elliptical mirror
Detection:Silicon photo diode
Size sensitivity:0.50 micrometer
Particle channel sizes:Four sizes: 0.5, 1.0, 3.0, 5.0 micrometer
Size resolution:meets requirements of ISO 21501-4 – 10% typical
Concentration limit:1000 particles per liter (10 x 106 particles per cubic meter) (10% coincidence)
Sample flow rate:100 liters per minute (0.10 cubic meter or 3.53 cubic feet per minute)
Flow rate control:Electronic, automatic closed loop
Sample tube extension:1/2” (12.7 mm) I.D., up to 6.5 ft. (2.0 meters) max. length
Max False Count Rate:2.0 per CM >0.5 µm (95%UCL) Per ISO 21501-4 (1 count per 5 minutes)
Battery:Replaceable 9.6 Volts, 12.6 Amp hour Nickel Metal Hydride
Battery operation time: 3.0 to 4.0 hours of continuous operation
Time to charge battery: 3.5 to 4 hours
Display:TFT Color LCD, ¼ VGA touch screen
Printer:Thermal Dot Matrix
Memory:3,000 samples: Date, Time, 4 Particle Channels, Analog Channels, Flow, ID, Sample Volume, transferable to PC via RS-232 serial port.
Unit ID:User selectable
User ID:Up to 20 users, besides supervisor, with password authentication
Security:Four security levels with user authentication
Location ID:Up to 100 per program; 16 characters long.
Program:Up to 30 user-defined and named, containing ID’s and settings.
Input/Output (RS-232)ASCII command set, CSV data output with check code 5 vdc @ 400 mA provided on an 9 pin
Input/Output (Ethernet)10/100Base-T, half or full duplex (auto sensing), http web server, Ethernet Modbus® server and TELNET server
Input/Output (USB)Transfer of stored memory to jump drive
Transfer of user-defined programs to/from jump drive
Transfer of units settings to/from unit via jump drive
Beep On Count:0.5 µm and greater
Audible alarm:Built-in
Alarm output:Dry contacts, normally open or closed via alarm connector. Connector also has 12VDC @ 250mA.
Alarm limits:Programmable for all particle channels and flow.
Dimensions:H-W-D: 8.65 x 8.5 x 9.5 inches (21.97 X 21.6 X 24.1 cm)
Weight:11.0 lb (4.99 Kg) without battery
14.25 lb (6.46 Kg) with battery
Power:Auto switching: 100–240 VAC, 47/63 Hz, 90VA max
Fuses:two 5 X 20 mm, 250V/2.0 Amp Slow
Operating range:0–36º C, 10–90% RH, non-condensing
Calibration:Factory Prime Calibration complying with ISO 21501-4, NIST traceable using CalPro 2.00 (or later) software program.
Calibration frequency:Recommended every 12 months.
Gas compatibility:Air, nitrogen; consult factory regarding other gases.